China Custom Rubber Steel Conveyor Roller Pulley for Conveyors in The Mining Industry chain pulley

Product Description

Rubber Steel Conveyor Roller Pulley For Conveyors in The Mining Industry

YILUN conveyor pulley is manufactured as per customer requirement, with main design under national standard, quality inspection focusing on shaft core, welded joint, rubber material and hardness, dynamic balance, and so on for longer product lifetime.

Our products are widely used in thermal power generation, harbors, cement plants, metallurgy and as well as light-duty conveying devices for industries.

Product Parameters

Application recycling industry
power industry
parcel transport industry
petro industry
coal mining industry
cement concrete industry
machining industry
Pipe/Tube/Shell 1)Material: Q235 Steel
2)Diameter:219mm-3000mm
3)Length:500mm-5000mm, depending on the belt width of the conveyor
Shaft/Axis Material:#45 Steel
Bearing Big roving crack, deep groove ball with double sealing
Welding Pipe and bearing housing with automatic welding
Surface Smooth steel color surface,  rubber lagging surface
Color Red, green, blue, or as required
Working life ≥30000 hours
Standard GB,ISO,DIN,CEMA,JIS
Special can be customized according to the customer or designed for the customer
Supply Ability 50 pcs per day
Certificate ISO9001:2008, BV, SGS

 

Quality inspection

Our Advantages

 

Yilun Conveyor Drum Pulley Advantage:

1. Dust-proof & Water-proof

The contact-sealing is adopted, which enjoys more superior dustproof and waterproof 

2. Low Vibration and Noise

Static balance test to ensure G40 accuracy level. 

3. Strong Force of Friction

The material for the shaft is forged shaft of 40Cr instead of #45 round steel,which improves mechanical property 

4. Easy Installation & Simple Maintenance

The bearing block and taper-lock are ground, which ensures the installation precision 

5. Min 50000 hours of service life 

Product Features

 

Conveyor Pulley  Test  
1. All butt welds shall be full Penetration
2. All welds to be full seal welds to prevent rust
3. Shell seam welds are submerged arc (SAW)
4. Includes stress relieving of shell prior to machining
5. Ultrasonic testing of all shafts
6. Drillings for Temperature probe/vibration analysis device
7. Remove all butts and sharp edges
Conveyor Pulley Shaft Selection  
The major cause of conveyor pulley failure is excessive shaft deflection. The Conveyor Pulleys - ZheJiang HSCD Engineering department can perform Stress Analysis and Finite Element Analysis to maximize your conveyor pulley performance. 
 
Conveyor Pulley Shell Material  
Q345B Carbon Steel
GR350 Carbon Steel
ANSI 4140 Alloy Steel
ASTM A514B Stainless Steel
Bearing House  NSK/ /HRB/LYC, as customer request. 
Conveyor Pulley Lagging  
Plain rubber lagging, Herringbone, and CZPT grooves are all available 
. Hot Vulcanised Durometer 
. Hardness 50-55-65 Shore A, M Grade
. Oil Resistant, Heat Resistant FRAS
Comprising  
•Drive pulley, Head pulley, and Tail Pulleys
•Take-Up Pulleys,
•Snub pulley & Bend Pulleys
•Self Cleaning Spiral CZPT pulley & Drum Pulleys
Significant advantages  
• The thick pulley shell absorbs more stress.
• The large CZPT angle provides superior belt tracking capabilities.
• True concentric machining provides:
• maximum contact with the belt,
• consistent belt content discharge,
• less deflection of shaft,
• less stress on the bearings
Available
Conveyor Pulley Designs
 
•Liveshaft or Deadshaft types.
•Flat or crowned shell.
•Taconite, labyrinth, or specialty seals.
•Oil or grease lubricated.
• Self-centering or low-pressure lock element designs.

Packaging & Shipping

 

Iron Pallet Packing of Convey Pulley for shipping in 20ft or 40ft containers.

Customer visiting&Exhibitions

After Sales Service

We give our customers the greatest support in after-sale service.
1. Send the engineer to train how to install the conveyor face to face;
2. Any problems can be solved online in time;
3. Conveyor/Roller/Idler Parts are available in stock.
4. Strict Quality Control to keep the long lifetime.
What kinds of Conveyor Pulleys we can manufacture:
·Conveyor head pulley, Conveyor drive pulley, Conveyor bend pulley, Conveyor Tail Pulley
·Conveyor tension pulley, Conveyor snub Pulley, Conveyor CZPT Pulley, Conveyor take up Pulley, and so on

Company Profile

HangZhou CZPT Conveying Machinery Co., LTD was founded in 2005, It is located in the economic and development zone of Xihu (West Lake) Dis., HangZhou city, Shangdong Province. Our company is specialize in fixed conveyors, movable and going up and down conveyers with type TD75, DTII, and DTIIA. the roller and drum/pulley. Our company also gain some product patent.it also improves our brand "YILUN" and also implores new markets, such as Europe, Australia, South Africa, the Middle East, Africa, etc. 

FAQ:
1. Q: Is your bearing type and brand usually used? 
 A: Large ball bearing type deep ball bearing with SRB, and according to customer's requirements. 

2. Q: How is your Payment Term? 
A: T/T or L/C. Another payment term we can also discuss. 

3. Q: Can you customize it? 
A: We support customization according to your request. 

4. Q: What's the MOQ? 
A: 3 pieces. 

5. Q: What's the production capacity of your conveyor pulley? 
20 pcs/day.
6. Q: What's your roller's lifetime?
Our pulley has a long life with good performance and usually
makes sure 30000 to 50000 hours under the normal site and operation.

If you are interested in us, pls contact me  ^ ^  

Material: Carbon Steel
Surface Treatment: Rubber Lagging
Motor Type: Frequency Control Motor
Installation: with Reducer
Pulley Length: 500-5000mm
Pulley Diameter: 219mm-3000mm
Customization:
Available

|

Customized Request

pulley

Three basic types of pulleys, their applications and ideal mechanical advantages

There are three basic types of pulleys: movable, fixed and compound. Each has its advantages and disadvantages, and you should be able to judge which type is best for your needs by looking at the table below. Once you have mastered the different types of pulleys, you can choose the right pulley for your next project. Now that you have mastered the three basic types, it is time to understand their applications and ideal mechanical advantages.

describe

The stress characteristics of a pulley depend on its size and construction. These stresses are derived by comparing the stress characteristics of different pulley designs. Stress criteria include static and fatigue strength analyses and specify maximum stress ranges. Stresses are calculated in a 3D stress field, including radial, tangential and axial stresses. The stress characteristics of pulleys are critical to the design and manufacture of industrial machines.
The principal stresses on the pulley shell are distributed in the tangential and hoop directions, close to the centerline of the pulley. If the pulley has a wide face, the axial stress occurring near the shell/disk junction can be large. The stress distribution was determined using British Standard BS5400 Part 10: Stresses at the shell and end disc connections for infinite fatigue life.
Another type of composite is a pulley with a belt section. Such structures are well known in the art. The corresponding help chapters for these elements contain detailed descriptions of the internal structure of these components. Chamfers between pulleys can also be defined using multiple tapers, with a smaller taper extending from midpoint 44 to large diameter 42. Additionally, the pulley can have multiple taper angles, and as the pulley moves away, the taper angle is from the center.

type

A pulley system uses a rope to move the object and one side of the rope to lift the load. The load is attached to one end of the pulley, while the other end can move freely in space. The force applied to the free end of the rope pulls the load up or down. Because of this, the mechanical advantage of the movable pulley is two to one. The greater the force applied to the free end of the rope, the greater the amount of movement achieved.
There are three common types of pulleys. The cast-iron variety has a rim at the front and a hub at the back. The arms of the pulley can be straight or curved. When the arms contract and yield instead of breaking, they are in tension. The top of the pulley centers the belt in motion and is available in widths ranging from 9mm to 300mm.
The rope, hub and axle are mounted on the pulley. They are common and versatile mechanical devices that make it easier to move or lift objects. Some pulleys change the direction of the force. Others change the magnitude. All types of pulleys can be used for a variety of different applications. Here are some examples. If you're not sure which type to choose, you can find more resources online.
pulley

application

The applications for pulleys are almost limitless. This simple machine turns complex tasks into simple ones. They consist of a rope or chain wrapped around a wheel or axle. Using ropes, one can lift heavy objects without the enormous physical exertion of traditional lifting equipment. Some pulleys are equipped with rollers, which greatly magnifies the lifting force.
When used properly, the pulley system can change the direction of the applied force. It provides a mechanical advantage and allows the operator to remain separate from heavy objects. They are also inexpensive, easy to assemble, and require little lubrication after installation. Also, once installed, the pulley system requires little maintenance. They can even be used effortlessly. Despite having many moving parts, pulley systems do not require lubrication, making them a cost-effective alternative to mechanical lifts.
Pulleys are used in many applications including adjustable clotheslines in different machines, kitchen drawers and motor pulleys. Commercial users of pulley systems include cranes. These machines use a pulley system to lift and place heavy objects. They are also used by high-rise building washing companies. They can easily move a building without compromising its structural integrity. As a result, many industries rely on technology to make elevators easier.

Ideal mechanical advantage

The ideal mechanical advantage of a pulley system is the result of rope tension. The load is pulled to the center of the pulley, but the force is evenly distributed over the cable. Two pulleys will provide the mechanical advantage of two pulleys. The total energy used will remain the same. If multiple pulleys are used, friction between pulleys and pulleys reduces the return of energy.
Lever-based machines are simple devices that can work. These include levers, wheels and axles, screws, wedges and ramps. Their ability to work depends on their efficiency and mechanical superiority. The ideal mechanical advantage assumes perfect efficiency, while the actual mechanical advantage takes friction into account. The distance traveled by the load and the force applied are also factors in determining the ideal mechanical advantage of the pulley.
A simple pulley system has an MA of two. The weight attached to one end of the rope is called FA. Force FE and load FL are connected to the other end of the rope. The distance that the lifter pulls the rope must be twice or half the force required to lift the weight. The same goes for side-by-side pulley systems.

Materials used in manufacturing

While aluminum and plastic are the most common materials for making pulleys, there are other materials to choose from for your timing pulleys. Despite their different physical properties, they all offer similar benefits. Aluminum is dense and corrosion-resistant, and plastic is lightweight and durable. Stainless steel is resistant to stains and rust, but is expensive to maintain. For this reason, aluminum is a popular choice for heavy duty pulleys.
Metal can also be used to make pulleys. Aluminum pulleys are lightweight and strong, while other materials are not as durable. CZPT produces aluminium pulleys, but can also produce other materials or special finishes. The list below is just representative of some common materials and finishes. Many different materials are used, so you should discuss the best options for your application with your engineer.
Metals such as steel and aluminum are commonly used to make pulleys. These materials are relatively light and have a low coefficient of friction. Steel pulleys are also more durable than aluminum pulleys. For heavier applications, steel and aluminum are preferred, but consider weight limitations when selecting materials. For example, metal pulleys can be used in electric motors to transmit belt motion.
pulley

cost

Replacing a tensioner in a car's engine can cost anywhere from $90 to $300, depending on the make and model of the car. Cost can also be affected by the complexity of the pulley system and how many pulleys are required. Replacement costs may also increase depending on the severity of the damage. The cost of replacing pulleys also varies from car to car, as different manufacturers use different engines and drivetrains.
Induction motors have been an industrial workhorse for 130 years, but their cost is growing. As energy costs rise and the cost of ownership increases, these motors will only get more expensive. New technologies are now available to increase efficiency, reduce costs and improve safety standards.
The average job cost to replace an idler varies from $125 to $321, including labor. Parts and labor to replace a car pulley can range from $30 to $178. Labor and parts can cost an additional $10 to $40, depending on the make and model of the car. But the labor is worth the money because these pulleys are a critical part of a car's engine.

China Custom Rubber Steel Conveyor Roller Pulley for Conveyors in The Mining Industry   chain pulleyChina Custom Rubber Steel Conveyor Roller Pulley for Conveyors in The Mining Industry   chain pulley
editor by CX